SwagerBuilds LLC · 4510 E 168 N, Rigby, ID 83442 · (208) 520-0636

Author: Bryce Swager

  • 7 Custom Home Design Trends I Am Actually Seeing on Teton Valley Job Sites in 2026

    7 Custom Home Design Trends I Am Actually Seeing on Teton Valley Job Sites in 2026

    Every January, NAHB drops their forecast on what custom home buyers are going to ask for that year. Most of the list is design-magazine fluff. But about a third of it lines up with what I am actually getting asked for on $1M–$5M custom homes in Driggs, Victor, Rigby, and Jackson Hole.

    Here are the seven 2026 trends that are showing up in real plans on my desk — and the two I am quietly steering clients away from.

    1. Warm minimalism replacing cold modern

    The all-white, hard-edged farmhouse era is done. What is replacing it: warm wood tones, plaster walls, soft curves, and earthy materials. Quartzite instead of pure white quartz. Walnut and white oak instead of painted maple. Linen and wool instead of microfiber.

    This matches what NAHB and the National Kitchen and Bath Association both reported in their 2026 forecasts. On my own jobs in Teton Valley, I have not specced a pure-white kitchen since mid-2024. Every active plan has either an alder, walnut, or rift-cut white oak base.

    2. Larger great rooms, smaller formal dining

    Owners are still asking for big, but the big has shifted. The great room has gotten taller and longer. The formal dining room has shrunk or disappeared entirely — replaced by a long kitchen island that seats 6–8 and a banquette with a view.

    Two of my last three Driggs builds eliminated the dedicated dining room. Owners said it became a place to dump mail. They would rather have a 14-foot island and a window seat looking at the Tetons.

    3. Mudrooms doing more work

    The “Teton Valley mudroom” is now its own design problem. Skis, snowboards, fly rods, dirt bikes, dog washing stations, ski boot dryers, and built-in benches with hidden charging outlets. It is not a closet anymore — it is a transition zone the size of a small bedroom.

    If you are planning a custom home in Driggs or Victor and the architect drew you a 6-by-8 mudroom, push back. Twelve by sixteen is the new normal here.

    4. Two primary suites — not for guests

    This one surprised me. NAHB flagged dual primary suites as a top-10 trend, and I am seeing it in my own pipeline. The use cases:

    • Multi-generational living — aging parents who visit for months at a time
    • Couples with very different sleep schedules
    • One spouse with chronic snoring or medical sleep needs
    • Owners who want a true guest suite that does not feel like a hotel room

    If this is you, get it on the plan early. Two primaries means two HVAC zones, two soaking tubs, two walk-in closets, and double the millwork. It is not a small change.

    5. Pantries that are basically second kitchens

    The “messy kitchen” or “back kitchen” pantry is no longer optional in the $2M+ range. Full second sink, second dishwasher, full-height refrigerator and freezer, microwave, coffee station, sometimes a second range. The visible kitchen stays clean. The cooking happens in the pantry.

    I built one in Rigby last year that was 14 feet long with a barn door. It is now the most-talked-about feature when owners walk guests through.

    6. Battery storage and energy resilience

    Every owner with a Teton Valley build is now asking the same question: “What happens if the power goes out for three days?” The answer used to be a propane generator. The 2026 answer is a hybrid system — solar plus a Tesla Powerwall 3 or a Franklin home battery, with a generator as backup.

    NAHB called this out specifically — energy resilience moved up from a top-30 priority to a top-10 priority for $1M+ custom homes nationwide. In our climate it is even more pronounced.

    7. The “real” home office — not a corner of a bedroom

    Remote work is not going away. The 2026 version of a home office: a dedicated room with a real door, soundproofing, dual monitors, hardwired ethernet, a video-conferencing-grade lighting and acoustics package, and ideally a window with a view that does not put afternoon sun in your face.

    If both spouses work from home, plan two offices on opposite ends of the house. We are doing this on every Jackson Hole build right now.

    The two trends I am steering clients away from

    1. Floor-to-ceiling glass walls on the west elevation. Looks incredible in a magazine. In Teton Valley, you are heating that glass for nine months a year and cooking the room from June through August. The performance hit is real and the heating bill will follow you. Use it on the south, manage it on the west, and trust me on this.

    2. Open concept “everything visible from everywhere.” The pendulum is swinging back toward defined rooms. NAHB also called this out. People are tired of hearing the dishwasher run during a movie. Plan for some walls.

    How to use this list

    If you are starting a custom home in 2026, take this list to your architect and ask which of these are on your plan and which are not. Do not chase trends — chase the ones that fit how you actually live.

    If you want a builder who has actually built these features and can tell you what they cost in real numbers, book a 30-minute planning call. No design fee, no pressure.

  • Best Lots for Custom Homes in Victor, Idaho: A Builder’s Field Guide

    Best Lots for Custom Homes in Victor, Idaho: A Builder’s Field Guide

    Victor lots are some of the most variable parcels in Teton Valley. Two lots half a mile apart can have $150K of difference in build cost just from infrastructure and soil conditions. This is a working builder’s field guide to picking a Victor lot you actually want to build on.

    I’m Bryce Swager. I run SwagerBuilds out of Rigby, and I build $1M-$5M custom homes across Teton Valley including Victor.

    Why Victor lots vary so much

    Three reasons:

    • Infrastructure isn’t uniform. Some Victor lots are platted and serviced; others are bare ground with no water, no septic-approved system, no power.
    • Soils change fast. Glacial till, river deposits, sandy loam, and the occasional shallow rock layer all show up within a few miles.
    • Pass exposure varies. Lots on the east side of Victor get heavier snow drift. Lots tucked closer to the Big Holes get more wind and snow on the driveway.

    Victor neighborhoods to know

    Teton Springs Resort & Club

    Gated, golf, infrastructure all built. Higher HOA fees but predictable. Different buyer profile and a different build experience because of design review.

    Pine Creek / Mike Spencer Hill

    More forested, larger lots, harder access in heavy snow years. Premium views but premium infrastructure costs.

    Victor town and Old Town parcels

    Smaller lots, easier infrastructure, walking-distance amenities. Best for buyers who want Victor lifestyle without the rural-lot infrastructure scope.

    Highway 33 corridor lots

    More accessible from Pass Trail Rd and the highway. Mixed bag on infrastructure and noise.

    The infrastructure questions you have to answer before you buy

    1. Water: Public, shared, or well? Well permitting can take 6-12 weeks. Shared systems need legal review. Public connection costs vary by district.
    2. Septic: Has it been perc-tested? What soil class is the test? Some Victor soils require engineered septic systems that add $25K-$60K vs. conventional.
    3. Power: Lower Valley Energy connection. Distance to lot line and trenching scope drive cost.
    4. Internet/data: Fiber, fixed wireless, or Starlink-only? For remote workers, this matters.
    5. Road and driveway: Public-maintained, HOA-maintained, or you-maintain-it? Snow plowing arrangements?

    Lots to walk away from in Victor

    • Bare ground with no perc test and a seller who won’t allow one
    • Lots in floodplain or active drainage that aren’t disclosed
    • Subdivisions that haven’t completed final plat approval
    • Lots with private-road agreements that aren’t recorded or are unclear
    • Lots downwind of major snow drift accumulations (talk to neighbors who’ve lived through 3 winters)

    How we scope a Victor lot at SwagerBuilds

    Same disciplined evaluation as a Driggs lot, with extra weight on infrastructure and pass access. We coordinate the geotech, perc test, utility connection scoping, and overlay/HOA review before signing a build contract. The cost of getting all of that wrong on a Victor lot can run $100K+; the cost of doing the diligence right is in the low five figures.

    If you’re shopping a Victor lot or have one under contract, book a planning call →. We can talk through what it’ll cost to build, what to negotiate before closing, and whether the lot fits the home you want.

    Related: Custom Home Builder in Victor: 2026 Owner’s Guide · SwagerBuilds in Victor · Driggs vs Victor Lot Buying

  • Best Lots for Custom Homes in Driggs, Idaho: A Builder’s Field Guide

    Best Lots for Custom Homes in Driggs, Idaho: A Builder’s Field Guide

    The single most expensive decision in a Driggs custom home build isn’t the kitchen, the millwork, or the roof. It’s the lot. The wrong Driggs lot can add $200K to your foundation budget before you’ve poured a slab. The right one frames the Tetons through your great room and pays you back every morning for the rest of your life.

    I’m Bryce Swager. I build custom homes in Driggs through my company, SwagerBuilds. This is my no-marketing-spin field guide to what actually makes a Driggs lot worth building on.

    Driggs neighborhoods worth knowing

    Mt. Moran Rd / River Rim

    Premium-priced ground with the strongest Teton view corridors in Driggs. Most owners building here are pricing $3M+ projects. We built The Arbogast Home on Mt. Moran Rd — see it in our portfolio.

    Targhee Hill / Targhee Towne

    Closer to Grand Targhee resort. More wooded, often more snow drift. Lots tend to be larger but build-site selection within the lot matters more.

    Teton Springs (mostly Victor side, some Driggs proximity)

    Subdivided community with HOA, golf, and infrastructure. Different buyer profile and different build experience.

    Lower Valley / Driggs town parcels

    Closer to schools, the airport, and town amenities. Less dramatic Teton views but easier infrastructure and faster commute everywhere in the valley.

    The five questions every Driggs lot has to answer

    1. What does the geotech actually show? Driggs sites range from sandy loam to glacial till to lava rock. Lava rock at 4 feet adds $30K-$60K to your foundation. Real geotech reports cost $3K-$5K. Skipping them costs 10x that.
    2. Where does the snow drift? The prevailing winter wind in Driggs comes off the Big Holes. Where it deposits snow on your lot dictates driveway placement, garage door orientation, and whether your front door buries every February. Most architects miss this. We don’t.
    3. What’s the actual view corridor at the build site? A Teton view from the road doesn’t mean a Teton view from your great room. Stake the building corners, stand inside the imagined space, look at the Tetons. Or hire a builder who’ll do it with you.
    4. Is power and water at the lot line? Lower Valley Energy (the local co-op) connection costs vary by lot. Some are $5K. Some are $40K+. Get it scoped before you write the offer, not after.
    5. What’s the drainage doing? Spring runoff in Teton Valley moves a lot of water. A lot that looks fine in August may be sitting in standing water in May. Site visits in shoulder seasons matter.

    Lots to be cautious about

    • Lots with no septic perc results. If the seller hasn’t perc-tested it and won’t allow it before closing, walk.
    • Lots with steep slopes that face north. Add foundation cost, lose solar gain, fight ice on the driveway every winter.
    • “Subdivision-ready” lots that aren’t really. Some marketed-as-finished subdivisions still need final road acceptance, water hookups, or other infrastructure before construction can start.
    • Lots inside scenic overlay districts you didn’t know existed. Teton County (ID) has overlay reviews on certain ridgelines and view corridors that can add 60+ days to permitting.

    How SwagerBuilds evaluates a Driggs lot for clients

    Before any custom home contract is signed, we run:

    • Site visit with the architect (planned siting, view corridors, sun)
    • Geotech engagement and report review
    • Septic perc verification
    • Power and water connection scope and cost estimate
    • Permit-conditions check (overlay districts, setbacks, view-corridor reviews)
    • Snow drift and drainage assessment

    If the lot can’t handle the home you want to build, we tell you before the contract — not in month four when the foundation cost just went up $80K.

    Got a Driggs lot under contract or close to one? Book a 30-minute planning call → and we’ll talk through what it’ll take to build there.

    Related: Custom Home Builder in Driggs: 2026 Owner’s Guide · SwagerBuilds in Driggs · Cost to Build in Teton Valley 2026

  • Victor, Idaho Custom Home Builder Guide (2026): Owner Q&A

    Victor, Idaho Custom Home Builder Guide (2026): Owner Q&A

    If you’re looking for a custom home builder in Victor, Idaho, you’re already in the rarefied air. Victor isn’t where most Teton Valley searches start — most start in Driggs. By the time you’re searching specifically for a Victor builder, you’ve usually got a lot in mind, a budget that’s serious, and a build window you need to plan around.

    I’m Bryce Swager, owner of SwagerBuilds. We build $1M-$5M custom homes across Teton Valley including Victor, with our shop based in Rigby. Here’s the unfiltered take on building custom in Victor.

    Why Victor is its own market within Teton Valley

    Victor sits 8 miles south of Driggs, tucked closer to the Big Hole Mountains, with a much shorter drive over Teton Pass to Jackson Hole. That changes the buyer profile materially:

    • More remote workers and commuters who want Idaho property tax with Jackson Hole proximity.
    • More second-home owners who chose Victor specifically for pass access.
    • Lots without finished infrastructure are common — many parcels lack water, septic, or power at the lot line.
    • Pass closures matter — winter Teton Pass closures affect material delivery, sub schedules, and your own commute.

    What it costs to build a custom home in Victor

    Per-square-foot pricing in Victor tracks closely with Driggs:

    • $450-$650 per square foot for a true SwagerBuilds custom home in Victor with stamped engineering, JobTread tracking, daily logs, and custom millwork.
    • $650-$800+ per square foot for high-end builds with complex site work, premium materials, or non-standard architectural specs.

    Watch out: Victor lots without infrastructure can add $50K-$200K+ to total project cost depending on water/septic/power scope. We bid that work transparently before signing the construction contract — not after framing reveals what you’re really paying.

    For a side-by-side cost comparison vs. Jackson Hole, see Building Custom in Jackson Hole vs Teton Valley: The Real Cost Difference.

    Build timeline in Victor: same as Driggs, with one twist

    14 to 22 months total. Stage breakdown is identical to a Driggs build. The Victor twist: Teton Pass closures during winter and major snowstorms can stall material delivery for days at a time. Procurement schedules in JobTread account for this, and we order long-lead items the day the contract signs to absorb pass-related delays.

    Choosing a Victor lot: what most buyers miss

    I scope every Victor lot against five things before I’ll quote a build:

    1. Water source. Public water, well, or shared system? Each has different cost implications and well permitting can add 6-12 weeks.
    2. Septic feasibility. Soils on Victor lots range from sandy loam to glacial till. A geotech and septic perc test before contract is non-negotiable.
    3. Power to lot line. Lower Valley Energy connection costs and timelines vary wildly. Some lots are $5K to connect; others are $40K+.
    4. Pass-access reality. If you’re commuting to Jackson, evaluate the actual drive year-round, not just the August version your realtor showed you.
    5. Snow drift patterns. Where the wind carries snow on your lot affects driveway placement, garage orientation, and roof design. Most architects don’t ask. We do.

    If you’re still lot-shopping between Victor and Driggs, this article will help: Should You Buy a Lot in Driggs or Victor in 2026?

    How to evaluate a Victor custom home builder

    Same five questions I’d ask in Driggs, with two Victor-specific add-ons:

    • Have you built in Victor before? Lot infrastructure, sub-availability, and build-season compression all benefit from local muscle memory. Asking “where are your three most recent Victor builds?” filters out builders who treat Victor as an afterthought.
    • How do you handle pass-related material delays? Real answer: “We order long-lead items the day the contract signs and we have a sub bench that doesn’t fall apart when the pass closes.” Vague answer: “We deal with it as it comes.”

    Why SwagerBuilds for a Victor custom home

    • 5.0★ on Google with all 5-star reviews. BuildZoom 94. Zero complaints on file.
    • Active in Victor and across Teton Valley since 2016 — we know the inspectors, the trades, and the soils.
    • Daily JobTread logs and 24/7 cameras built specifically for out-of-state owners.
    • Stamped structural engineering on every build, including snow load.
    • Written change orders before any work proceeds. Fixed-price contracts.
    • Direct phone access to me — not a rotating cast of project managers.

    I take a small number of Victor builds per year. If you’ve got a lot identified or under contract and you want a real read on what it’ll take to build there, book a planning call →.

    More on Victor & Teton Valley: SwagerBuilds in Victor · Teton Valley overview · Our 6-stage process · How to Build in Teton County

  • Custom Home Builder in Driggs, Idaho: The 2026 Owner’s Guide

    Custom Home Builder in Driggs, Idaho: The 2026 Owner’s Guide

    If you’re searching for a custom home builder in Driggs, Idaho, you’re either about to spend $1M to $5M with someone, or you’re trying to figure out who to even talk to. This guide is the unfiltered answer I wish someone had handed me when I was on the buyer side of my own first build.

    I’m Bryce Swager. I own and operate SwagerBuilds, a custom home builder serving Driggs, Victor, Tetonia, Rigby, and across into Jackson Hole. I’ve been self-employed in construction since 2016, and most of my pipeline lives in Driggs.

    Here’s what every owner asking “who’s the best custom home builder in Driggs?” actually needs to understand before signing a contract.

    What makes Driggs different than building anywhere else

    Driggs sits at 6,200 feet on the Idaho side of the Tetons, in Teton County (ID). Three things make building here harder than building down on the Snake River Plain:

    • Snow load. Real snow load. Roofs and foundations need to be engineered for the actual loads our valley sees — not generic IRC stamps from a warmer climate. Every SwagerBuilds project gets stamped structural drawings sized for Teton Valley conditions specifically.
    • Frost depth and freeze-thaw. Footings have to go below frost (typically 4 feet here, deeper in some sites). Driveways and exterior concrete have to be specified for freeze-thaw cycles or they spall in 3 years.
    • Build season compression. The practical window to get framing and dry-in done before winter is shorter than most builders new to the valley plan for. Missing dry-in by the first hard freeze costs 4-8 weeks easily.

    How much does a custom home cost in Driggs?

    Here’s the honest 2026 range from a working Driggs builder:

    • $400-$500 per square foot — builder-grade custom with quality finishes, simpler architecture, standard lot conditions. Real, but not what most luxury Driggs buyers are picturing when they say “custom.”
    • $500-$650 per square foot — the sweet spot for a true SwagerBuilds custom home. Architect-led design, custom millwork, stamped engineering, real finish carpentry, JobTread tracking, daily logs.
    • $650-$800+ per square foot — high-end custom with significant architectural complexity, premium stone and millwork, complex site work, or unique structural challenges. Common for larger Mt. Moran Rd or river-frontage builds.

    Total project cost for most Driggs custom homes lands between $1M and $5M. If you’re shopping under $1M for a custom home in this market, you’re not actually shopping for a custom home — you’re shopping for a stock plan with finish upgrades. That’s a different scope, and there are good builders who run that range. I’m not one of them, and I’ll tell you that on the planning call rather than dragging you through six meetings.

    For a deeper breakdown by line item, see What It Actually Costs to Build a Luxury Custom Home in Teton Valley in 2026.

    How long does it take to build a custom home in Driggs?

    14 to 22 months from contract signing to keys-in-hand. The honest stage breakdown:

    • Design & pre-construction: 4-6 months
    • Permitting (Teton County ID): 2-4 months
    • Site work and foundation: 1-2 months
    • Framing and dry-in: 2-3 months (race against winter)
    • Mechanical, drywall, and prep: 2-3 months
    • Finish, trim, and punch: 3-4 months

    Anyone telling you they can do a real custom home in Driggs in 9 months is either lying, building a stock plan, or planning to skip discipline you’ll pay for later. The full timeline breakdown is here: How Long Does It Really Take to Build a Custom Home in Teton Valley?

    Permitting in Teton County (ID): what to expect

    Teton County (ID) permitting moves at its own pace. Complete submittal packages move fastest. Plan corrections, missing documents, and incomplete site plans add weeks per round.

    If you’re an out-of-state owner, this is the part that frustrates buyers most. SwagerBuilds handles the entire submittal, corrections, fees, and inspections directly. You don’t need to call the building department from another time zone. We file complete packages and we know which inspectors prefer what.

    How to evaluate a custom home builder in Driggs

    Most buyers ask three or four good questions and 26 bad ones. Here are the questions that actually predict whether a builder will run your project well:

    1. Show me your project management software. If they say “we use email and a notebook,” walk away. Real custom builders run on something — JobTread, Buildertrend, CoConstruct, or similar. SwagerBuilds runs on JobTread. JobTread published a case study on why we switched.
    2. Walk me through a real change order. The honest answer involves “written, priced, signed before any work proceeds.” If they describe verbal change orders or “we’ll true it up at the end,” they’re going to surprise you with a $30K invoice in month 8.
    3. What’s your daily communication look like with owners? “I’ll call you when there’s a problem” is the wrong answer. The right answer is “daily photo logs, on-site cameras, and a real-time dashboard you can check from your phone.”
    4. Can I read your last 5 client reviews — the real ones, on Google? SwagerBuilds is at 5.0★ with 7 published reviews. Other builders may have 50 reviews and a 4.2 average. Read the 1- and 2-star reviews specifically.
    5. What’s your BuildZoom score and Idaho complaint history? Public records. SwagerBuilds is BuildZoom 94, zero complaints on file.

    The full version of this list is here: 10 Questions to Ask Before Hiring a Teton Valley Custom Home Builder.

    What does a SwagerBuilds Driggs project actually include?

    • Lot feasibility, siting, and view-corridor analysis specific to your Driggs parcel
    • Architect coordination from concept through stamped drawings
    • Stamped structural engineering sized for Teton Valley snow load
    • Full Teton County (ID) permit submittal and corrections
    • Site work, foundation, framing, dry-in, mechanical, finish
    • Custom millwork milled in our Rigby shop and installed on-site
    • Daily JobTread photo logs and 24/7 on-site cameras
    • Written change orders before any work proceeds
    • Fixed-price contract once design is locked
    • One-year SwagerBuilds workmanship warranty on top of standard Idaho coverage
    • Direct phone access to me — not a project manager, not a sales rep

    When should you start the planning conversation?

    If you want to be in your Driggs home by next summer, the design contract needed to be signed by March 15 of this year. If you want to be in 18 months out, start design now. If your target is 24+ months out, you have the luxury of a deliberate procurement schedule and a properly sequenced winter dry-in.

    I take a small number of Driggs custom home projects per year. Book a 30-minute planning call → if you want an honest read on whether SwagerBuilds is the right builder for your project, your lot, and your timeline.

    More on building in this market: SwagerBuilds in Driggs · Our 6-stage process · Real client reviews · Why Most Custom Builds Go Over Budget