SwagerBuilds LLC · 4510 E 168 N, Rigby, ID 83442 · (208) 520-0636 · Idaho Contractor Registration RCE-57499

Category: Uncategorized

  • Egress Window Requirements for Idaho Basement Bedrooms

    Egress Window Requirements for Idaho Basement Bedrooms

    If you’re finishing a basement bedroom in Idaho, the room needs an egress window. This is enforced. Here’s exactly what’s required and what it costs.

    Idaho code requirements (IRC R310)

    • Minimum 5.7 sq ft of clear opening (5.0 sq ft for grade-floor openings).
    • Minimum 24″ clear height and 20″ clear width.
    • Maximum 44″ sill height from finished floor.
    • Window well required if sill is below grade. Minimum 36″ projection, 9 sq ft area.
    • Permanent ladder required in window wells deeper than 44″.
    • Operable from inside without keys, tools, or special knowledge.

    Install cost in Eastern Idaho (2026)

    • Cut concrete + install + window well + window: $3,500–$6,500
    • Above-grade existing rough opening (just window swap): $1,200–$2,400
    • Steel window well with stairs: $400–$900
    • Composite/landscape well: $600–$1,400

    Workarounds that don’t work

    • “It’s a bonus room, not a bedroom.” Inspectors call this. A closet plus a door makes it a bedroom.
    • “I’ll just call it an office.” Same problem if there’s a closet.
    • “The existing window is close enough.” If it doesn’t hit 5.7 sq ft clear, it fails.
    • “I won’t pull a permit.” Insurance won’t cover a fire fatality in a non-permitted, non-egress bedroom. Don’t.

    Bonneville and Jefferson County process

    Both counties require a permit for egress install. Plan review takes 3–7 business days. Final inspection happens after install. Budget 2 weeks total from permit pull to passed inspection.

    Need an egress window installed? Get a fixed-price quote →
  • 4 New Materials and Products from IBS 2026 That Are Actually Showing Up in My Custom Builds

    4 New Materials and Products from IBS 2026 That Are Actually Showing Up in My Custom Builds

    The International Builders’ Show in Vegas drops a few hundred new products every January. Most are forgettable. A handful change how I build for the next five years. Here are the four IBS 2026 launches that are already in active spec packages on my custom homes in Driggs, Victor, and Tetonia.

    1. Wilsonart Sapphire Rift surfaces

    Wilsonart launched a new line of large-format porcelain and engineered stone called Sapphire Rift at IBS 2026. The headline: it looks like rift-cut stone, but it has the durability of porcelain and the price point of a high-end quartz.

    Why it matters for a luxury custom home: in Teton Valley we get owners who want the look of natural stone (calacatta, taj mahal) but cannot stomach the maintenance — etching, sealing, hard water spots in the bath. Sapphire Rift gives you the look without the babysitting.

    I have specced it on two upcoming master baths and one outdoor kitchen. The outdoor kitchen is the bigger deal — it survives our freeze-thaw cycle in a way real marble does not.

    2. Rockwool Cavityrock for exterior wall systems

    Rockwool announced a refreshed Cavityrock product at IBS 2026 with improved compressive strength and a tighter installation tolerance. For high-performance walls in our climate (Climate Zone 6B at the valley floor, 7 above 7,000 feet), continuous mineral wool exterior insulation is the right answer for thermal bridging.

    Why it matters: in a $2M+ Teton Valley build, the energy bill over 30 years is real money. A wall assembly with 3″ of continuous Rockwool exterior insulation, a proper rainscreen, and triple-pane windows performs in a different category than a code-minimum wall. The new Cavityrock is easier for the framing crew to install correctly — which is what kills these systems on most jobs.

    3. Lutron Natural Light shading + circadian dimming

    Lutron showed off a fully-integrated Natural Light system at IBS 2026 — automated shades coordinated with circadian dimming so the house compensates for the sun moving across the sky.

    Honest take: this is the smart-home upgrade I would prioritize over almost any other on a luxury custom home. Owners notice it. Light quality changes how a house feels morning to evening, and a Lutron system that does it automatically is the difference between “smart home” and “house that takes care of itself.”

    I now spec it on every $2M+ build. More on smart home features here.

    4. ClosetMaid FastFinish modular closet system

    An odd one to put on a luxury list, but worth it. ClosetMaid launched FastFinish — a modular closet system at IBS 2026 with a finish that holds up against custom millwork inspection at a fraction of the time and cost.

    Why it matters: primary closets and pantries in our homes get full custom millwork. But every luxury home has 4–6 secondary closets — kids’ rooms, guest rooms, mudroom storage — where full custom millwork is overkill. FastFinish is now my answer there. It looks right, it installs in a day, and it keeps the budget for the millwork that matters.

    What I am skipping from IBS 2026

    For balance, here is what I am not putting in a Teton Valley custom home this year:

    • “Smart” toilets with screens. They will fail in 5 years and you cannot rip out a toilet without redoing the bathroom.
    • Hempcrete walls. Interesting product, not yet code-friendly in Idaho or Wyoming, and the trade base does not exist yet.
    • 3D-printed concrete elements. Cool tech, not ready for snow-load engineering at our elevations.
    • Anything battery-powered that should be hardwired — locks, doorbells, blinds. WiFi is not a permanent solution to a permanent problem.

    How to use this list

    If you are planning a custom home or a major remodel in Teton Valley, Jackson, or Eastern Idaho, ask your builder which of these they have actually installed. Specifying a product and installing it correctly are two very different things.

    If you want a builder who has them in active spec packages and can tell you what they cost installed, book a planning call.

  • What Custom Home Buyers Are Actually Worried About in 2026 (And What I Tell Them)

    What Custom Home Buyers Are Actually Worried About in 2026 (And What I Tell Them)

    The Association of Professional Builders and NAHB both published 2026 buyer-sentiment data in the last few months. Reading both reports back to back, four concerns kept showing up. They also keep showing up on my planning calls.

    Here is what custom home buyers are actually worried about in 2026 — and the honest answers I give clients in Teton Valley, Eastern Idaho, and Jackson Hole.

    Concern 1: “I am going to go way over budget.”

    This is the number one concern in every survey. APB’s 2026 industry report flagged it as the top reason custom home prospects do not sign with a builder.

    It is also the most legitimate concern, because it usually happens. The way most builders structure their contracts (cost-plus, allowance-heavy, vague exclusions) makes overruns almost inevitable.

    What I tell prospects: I run fixed-price contracts with a written scope document, no allowances on items where I can pin a real number, and a change-order discipline that requires sign-off in writing before the work moves. I went over budget on my own home because I did not have a real cost-tracking system. That experience is why I built the system I run today on JobTread.

    If your builder cannot show you, in writing, how they prevent over-budget, that is the answer to your question. Here is the long version of how I handle it.

    Concern 2: “It is going to take forever.”

    NAHB’s 2026 forecast pegged the average custom home in mountain markets at 10–16 months from contract to move-in. That feels long because it is long compared to a tract build.

    What I tell prospects: a true luxury custom home in Teton Valley takes 14–22 months. Anyone telling you 9 is either lying or skipping engineering, design discipline, or selections — all of which will cost you more later. The schedule is what it is. The honest variable is whether you have a builder who keeps the schedule visible to you and pushes it.

    My breakdown of a realistic 18-month timeline is here.

    Concern 3: “I will not know what is going on while it is being built.”

    This is especially common with out-of-state buyers building a vacation or retirement home in Teton Valley or Jackson. APB called this out as the second-highest source of buyer anxiety in their 2026 report.

    What I tell prospects: every SwagerBuilds project includes 24/7 on-site cameras, daily JobTread photo logs, and a real-time dashboard you can check from your phone. You will know more about what is happening on your job site than the average local owner does on a job they drive past every day.

    I built that system specifically because most of my clients are out-of-state. JobTread published a case study on it.

    Concern 4: “I am going to fight with the builder.”

    The least talked-about concern but the most real one. Custom home builds are stressful. Decisions, money, schedules, and the most important investment most people will ever make. Stress is unavoidable. Conflict is not.

    What I tell prospects: I have the hard conversations early. If a finish you picked is not going to perform, I will say so on the call instead of letting you find out at year three. If a budget number is off, I tell you on day one — not draw 4. If a decision is going to delay you 4 weeks, I name the trade-off in writing.

    Most builder-client fights come from things that should have been said in week 2 and got buried until month 18. I would rather be the most honest builder you talk to than the most agreeable one.

    The pattern under all four concerns

    Every one of these comes back to the same root: lack of visibility and lack of discipline. Buyers are not afraid of building a custom home. They are afraid of being in the dark and getting steamrolled.

    Pick a builder who runs visible systems and is willing to say hard things. The cost of getting that wrong is much higher than the price difference between any two bids you are looking at.

    If you want to test whether SwagerBuilds is the right fit, the next step is a 30-minute planning call. Book one here.

  • The 5 Smart Home Features Every $2M Custom Home Should Have in 2026

    The 5 Smart Home Features Every $2M Custom Home Should Have in 2026

    I get asked about smart home tech on basically every project now. Five years ago it was a novelty. In 2026, on a $2M+ luxury custom home, it is part of the build the way HVAC and electrical are part of the build.

    Here are the five smart home systems I install on every luxury custom home in Teton Valley, Eastern Idaho, and Jackson Hole — and the ones I tell clients to skip.

    1. Lutron lighting — the only one I trust

    If you are wiring a smart home in 2026, start with Lutron. RadioRA 3 or HomeWorks. Not Z-Wave, not WiFi switches, not the cheap stuff at the big box store. Lutron is what every other system is judged against, and it is what works five years in when the rest of the smart home is on its third firmware update.

    Why it matters: a $3M house with $40 dimmers is the most common false economy I see. The dimmers fail, the WiFi-based scenes glitch, and the whole “smart house” experience falls apart on the thing the owner touches 50 times a day.

    Lutron also just released their Natural Light feature in 2025 — automatic circadian dimming that follows the sun. We are installing it on every new build. Owners notice the difference within a week.

    2. Josh.ai for whole-home voice and AV control

    The luxury alternative to Alexa or Google Home. Josh.ai handles voice control of lighting, shades, audio, video, security, climate, and pool/spa from a single interface. It is privacy-respecting (does not stream every utterance to a cloud), faster than the consumer options, and integrates natively with Lutron, Sonos, Control4, and most major shade systems.

    Honest take: Josh costs about 5x what Alexa costs. On a sub-$1M home it does not pencil. On a $2M+ home it does — because the owners are spending serious money on every other finish and the smart home experience needs to match.

    3. A real energy management system, not just solar

    “Smart home” used to mean lights and thermostats. In 2026 it means energy. Every Teton Valley client of mine is now asking how to handle a 3-day power outage in February. The answer is a combined system:

    • Solar array sized to actual usage (not the salesperson’s upsell)
    • Tesla Powerwall 3 or Franklin Home Power for battery storage
    • Whole-house generator (propane, auto-transfer) as backup-to-the-backup
    • An energy management dashboard the owner can actually read

    The Powerwall 3 is the new standard — it has the inverter built in, so a single unit can run essential loads (well pump, fridge, internet, a few outlets) for 12+ hours without the generator kicking on.

    4. Hardwired security cameras with an actual NVR

    Skip the WiFi cameras. Skip the doorbell cam that emails you every time a leaf moves. On a luxury custom home you want PoE (power-over-ethernet) cameras hardwired back to a network video recorder in a closet. Hikvision Acusense, Axis, or Ubiquiti UniFi Protect.

    Reasons: better resolution, no cloud subscription forever, no batteries to replace, encrypted, and the recording lives on your own NVR — not someone else’s server. For Teton Valley vacation homes that sit empty in shoulder season, this is non-negotiable.

    5. Climate zoning that is actually zoned

    I see five-zone HVAC labels on plans where there are really two physical zones doing the work. That is not zoning — that is theater. Real climate zoning in 2026 means:

    • Separate physical zones for the great room, primary suite, secondary bedrooms, and lower level
    • Variable-speed equipment (not single-stage)
    • A smart thermostat per zone (Ecobee Premium or Mitsubishi’s integrated control)
    • Connection to the rest of the smart home so “Movie Night” actually drops the great room temp without you noticing

    What I tell clients to skip

    • Smart fridges. The screens fail before the compressor does. Buy a great fridge, skip the screen.
    • Anything WiFi-only that controls a critical system. WiFi goes down. The garage door, the front door, and the heat should not.
    • Voice-controlled faucets and toilets. They will fail at the worst possible moment. Use a real plumbing fixture.
    • Subscription “smart home” platforms. If the company goes under, your house gets dumber. Stick with brands that have been around for 20+ years.

    Designing for the system, not bolting it on

    The single biggest mistake I see is owners who try to add this stuff after framing. By then, all the conduit, low-voltage wiring, and equipment closet space is already designed around the “dumb” version of the house.

    If smart home is on your list, get it locked into the plan during design and pre-construction, not on a change order in Stage 4. The cost difference is 3–5x.

    If you want to talk through what makes sense for your specific build, I do a 30-minute planning call where we walk through your plans and pick the systems that actually pencil. Book a call here.

  • What Change Orders Actually Look Like on a Build That Does Not Go Sideways

    What Change Orders Actually Look Like on a Build That Does Not Go Sideways

    Almost every luxury custom home build I have cleaned up after another builder failed for the same reason: change orders nobody wrote down. The client thinks they got an upgrade. The builder thinks the client agreed to the cost. By the time someone pulls a thread, there is $80K–$300K of work that nobody can prove was authorized — and a relationship that is about to end in arbitration.

    Here is what a change order should look like on a build that is run right.

    A change order is a contract amendment

    Not a phone call. Not a text. Not a yeah-that-sounds-great on a jobsite walk. A change order is a written, priced, dated, signed amendment to the original contract. Anything less is a future fight.

    On every SwagerBuilds project, a change order has six things on it:

    1. The exact scope of work changing — what is being added, removed, or upgraded.
    2. The price impact — broken out by labor, materials, and overhead.
    3. The schedule impact — added days, if any, and which trades are affected.
    4. The cost source — the actual quote from the supplier or sub, attached.
    5. The signature line — both client and builder sign.
    6. The date — when it was written and when it is effective.

    If any of those six are missing, it is not a change order. It is a misunderstanding waiting to happen.

    The rule we run by: written and signed before work moves

    On every SwagerBuilds project, no work on a change order moves until it is written and signed. Period. Even if it costs us a day on the schedule. The reason: a job where every change is documented finishes on budget. A job where changes happen verbally finishes 15–30% over. Every time.

    What a typical custom home will see

    On a 4,500 sf custom home in Teton Valley, expect 15–35 written change orders over the life of the build. Some will be small ($500 — different door hardware). Some will be substantial ($75K — different window package). Most will be the client improving the build as they live in it on paper. That is normal. What is not normal is finding out about them at the closing walk-through.

    Three questions to ask any builder before you sign

    1. Show me a sample change order from a real recent project. If they hesitate, walk.
    2. What is your rule for when work can start on a change? Right answer: after it is written, priced, and signed. Anything else, walk.
    3. How are change orders tracked? Right answer: in our project management system, with running totals visible to the client. (We use JobTread.)

    Why this matters more than anything else

    A custom home is the largest single transaction most clients ever make. Change orders are where the trust either holds or breaks. Get the change-order discipline right and the build runs smooth. Get it wrong and the build runs your life.

    If you want to see exactly how SwagerBuilds runs change orders — including a real anonymized example from a recent build — book a 30-minute Planning Call. We will walk you through the system.