A bathroom remodel in Teton Valley or Driggs runs $18,000 to $45,000 for a mid-scope guest bath and $55,000 to $140,000 for a primary suite bath in 2026. Numbers assume a fixed-price contract with real fixtures, real tile, real cabinetry — not a Home Depot allowance and a subcontractor who ghosts you at rough-in. Here’s what a 20-year GC actually charges, line by line.
[Photo placeholder: Recently completed Driggs primary bath — vertical shot, tile detail]
What Does a Bathroom Remodel Actually Cost in Driggs and Victor?
Real 2026 numbers from Teton Valley jobs. A basic guest bath refresh — new vanity, mirror, light, toilet, paint, tile in the tub surround only — runs $12,000 to $22,000. A full guest bath rebuild — down to studs, new tile floor and walls, new vanity, new fixtures, new tub or shower pan — runs $22,000 to $45,000. A mid-range primary bath — dual vanity, walk-in tile shower, freestanding tub, heated floor, new lighting, new millwork — runs $55,000 to $95,000. A luxury primary suite bath with steam shower, custom cabinetry, radiant floors, high-end fixtures — $95,000 to $140,000-plus.
Jackson Hole runs 15 to 25 percent higher for the same scope. Materials cross the pass. Labor rates are higher. HOA and design review add weeks.
Why Is a Bathroom Remodel So Expensive?
Small room, huge trade density. A 100-square-foot bathroom touches plumbing, electrical, mechanical ventilation, waterproofing, tile, cabinetry, and painting. Six subs minimum. The linear feet of tile in a walk-in shower alone can hit $8,000 to $18,000 installed. Fixtures — a decent shower valve, thermostatic control, hand shower, and rain head runs $2,500 to $6,000 before install. A freestanding tub in the $2,500 to $8,000 range. Custom vanity with quartz or natural stone top: $4,000 to $12,000.
Then labor: demo, framing tweaks, plumbing rough-in, electrical rough-in, mechanical vent, waterproofing (Kerdi or Wedi system, not skim-coated cement board), tile setter, drywall, paint, finish plumbing, finish electrical, cabinet install, countertop template and install. That’s why a small room hits $45,000 without a luxury spec.
How Long Does a Bathroom Remodel Take?
Guest bath refresh: 2 to 3 weeks. Full guest bath rebuild: 4 to 6 weeks. Primary suite bath: 6 to 10 weeks. That’s from demo to punch list, assuming all product is on site before demo starts. Tile is the long pole — a walk-in tile shower with a custom pan is 5 to 8 working days for the tile setter alone, then dry time, then finish plumbing.
Winter builds in Teton Valley add 1 to 2 weeks if we’re bringing in materials during a storm cycle. Not a huge factor for interior work — just realistic scheduling.
What’s Included in a SwagerBuilds Bathroom Fixed-Price?
Everything from demo to punch. Permits. Structural if walls move. Plumbing rough-in and finish. Electrical rough-in and finish. Mechanical vent to exterior. Waterproofing system. Tile — every tile in the scope, priced to the specific SKU, not an allowance. Cabinetry, countertop, mirror, lighting, plumbing fixtures. Paint. Trim. Cleanup and disposal. If it’s in the drawings, it’s in the price.
What’s not included: anything you specifically pull out. That’s the whole point of fixed-price. No allowances means no “we ran over on tile” surprises.
Why Do Bathroom Remodels Blow Their Budget?
Allowances. Every time. A cost-plus or allowance-heavy contract lets the GC quote a low headline number by burying the real spec inside a $6,000 “tile allowance” and a $4,000 “fixture allowance.” You go shopping, fall in love with tile that’s $18 per square foot, and now the tile allowance is $16,000 instead of $6,000. The GC bills the overage plus markup. Multiply that across five allowance categories and you’re 40 percent over.
Fixed-price kills it. We pick the tile, fixtures, cabinets with you in pre-construction. Every SKU is priced. If you upgrade later, that’s a change order — but the base price stays honest. Seen every way a build goes sideways in 20 years watching budgets blow up in this valley, and allowances are the number one killer.
Do I Need a Permit for a Bathroom Remodel in Teton County ID?
Yes, in most cases. Any plumbing rearrangement, electrical work beyond fixture swaps, or structural change requires a permit in Teton County ID and Teton County WY. A pure cosmetic swap — new vanity in the same footprint, new mirror, new light on existing fixture box, new paint — often doesn’t. When in doubt, we permit it. Cheaper than getting caught unpermitted at resale.
What Should I Spec for a Cold-Climate Bathroom?
Ventilation matters at 6,200 feet. Undersized bath fans are the number one cause of mold and paint failure in Teton Valley bathrooms — recommend a 110 to 150 CFM fan, humidity-sensing, ducted with insulated flex to a roof cap or gable vent (never terminated in the attic). Heated tile floors are worth every dollar in a primary bath. Recessed cans should be IC-rated and airtight. Waterproof the shower with a proper Kerdi or Wedi system — cement board with mastic will fail here inside 5 years.
How Do I Get a Real Bathroom Remodel Quote?
Fill out the intake at swagerbuilds.com/start. We’ll do a site walk, measure, talk finish spec, and come back with a fixed-price contract in 2 to 3 weeks. See the whole home remodel hub if the bath is part of a bigger project, or the pricing page for how we structure numbers.
Frequently Asked Questions
How much does a small bathroom remodel cost in Driggs?
$12,000 to $22,000 for a cosmetic refresh, $22,000 to $45,000 for a full down-to-studs guest bath rebuild.
What’s the average cost of a primary bathroom in Teton Valley?
$55,000 to $95,000 for mid-range. $95,000 to $140,000-plus for luxury with steam shower, radiant floor, custom cabinetry.
How long does a bathroom remodel take?
Guest bath: 2-6 weeks depending on scope. Primary suite bath: 6-10 weeks. Timeline assumes all product on site before demo.
Do I need to move out during a bath remodel?
Only if it’s your only bathroom. Most Teton Valley clients keep living in the house with a functioning secondary bath.
What’s the biggest cost driver in a bathroom remodel?
Tile square footage and fixture spec. A large walk-in tile shower with high-end plumbing fixtures can add $15,000 to $25,000 vs a modest scope.
Can you match my existing tile or millwork?
Usually yes, if the material is still in production. Discontinued tile is the tough one — we’ll spec the closest current match and show samples in pre-construction.
Ready for a Fixed-Price Bath Quote?
4th-gen Rigby builder. Fixed-price, no allowances. Every SKU, every dollar, priced before demo. Start here.
Leave a Reply