Owner-led custom ski home builds in Teton Village — ski-in/ski-out luxury engineered for the realities of resort living. Mudroom logic that actually works. Snowmelt drives that don’t fail. Guest wings that handle eight people for a long weekend.
- Owner on every Teton Village jobsite. Bryce Swager runs your build personally.
- Licensed in Wyoming. Teton Village is Teton County, WY — we’re permitted and bonded.
- Built for resort living. We design around the way ski homes actually get used.
Schedule a 20-min build consultation → Or call (208) 520-0636
Teton Village Is a Different Build Than Anywhere Else
Building a Teton Village ski home isn’t a regular custom home build with snow added. The way the home gets used — and abused — is fundamentally different:
- 8-12 people for a long weekend, then empty for three weeks. That changes everything about how you size HVAC, plumbing, and storage.
- Ski gear, snowboard gear, bike gear, fishing gear — multiple sports, multiple seasons, and all of it dirty, wet, or both. Your mudroom isn’t an afterthought. It’s a system.
- Snow management is a daily problem. Snowmelt drives, snowmelt walkways, heated stairs, snow loads on roofs and decks, plowing access, snow storage. We engineer for all of it.
- Ski-in/ski-out access matters more than view direction. Where your boot room sits relative to the lift access is one of the most important design decisions.
- HOA design review is rigorous. Most Teton Village builds run through Teton Mountain Resort, Granite Ridge, Shooting Star, or other established HOAs with substantial architectural review.
- Resort-grade durability standards. Materials and finishes need to handle rental-grade use, even if you don’t rent. Standard residential specs fail.
Where We Build in and Around Teton Village
- Teton Village base — Direct ski-in/ski-out parcels, premium location
- Shooting Star — Established golf + ski HOA, design review
- Granite Ridge — Premium ski-access community
- Teton Mountain Resort core — Mix of single-family and resort lots
- Wilson side toward Teton Village — Larger acreage with mountain views
- Hoback / South of Village — Larger parcels with longer ski-access drives
Ski Home Design: What We Build For
A ski home that works has these elements designed in from day one:
Mudroom system (not just a mudroom):
- Boot drying lockers (commercial-grade, one per bedroom occupant + 2 guest)
- Ski/snowboard storage with proper ventilation and length
- Bench seating, separate spaces for arriving wet vs. departing dry
- Direct exterior access, no carrying gear through the kitchen
- Floor drain + tile that handles repeated soaking
Snowmelt + heated zones:
- Driveway (full or wheel-track depending on slope)
- Front walk and stairs to entry
- Roof eave melts above critical entries
- Sometimes decks and patios depending on use
Guest wing logic:
- Separate from primary suite for sleep isolation
- Bunkrooms work better than 4 small bedrooms for ski-trip groups
- Second laundry near the bunkroom
- A second living area / family room for kids
HVAC for variable occupancy:
- Zoning that handles 12 people one weekend and 0 the next
- Heat recovery for energy efficiency during high-occupancy weekends
- Smart thermostats with remote control for pre-arrival warming
Material standards:
- Wide-plank engineered hardwood (handles boot traffic)
- Large-format porcelain tile in mudroom and primary baths
- Quartzite or quartz counters (avoid soft marble in high-traffic kitchens)
- Real wood ceilings, beams, and millwork (the visual signature of mountain luxury)
What a Custom Home Costs in Teton Village
Teton Village is one of the highest-cost custom home markets in North America:
- Luxury finish: $900–$1,200/sqft
- Ultra-luxury / architect-driven: $1,200–$1,800+/sqft
- Trophy ski-in/ski-out: $1,800–$3,000+/sqft
A typical 4,500 sqft Teton Village luxury custom home runs $4M-$5.4M for construction, before land and design. Trophy builds run $10M-$30M+.
Teton Village land pricing (2026):
- Mid-tier Teton Village lot: $3M-$8M
- Premium ski-in/ski-out lot: $8M-$25M+
- Trophy direct-access lot: $20M-$60M+
Yes, those numbers are real. Teton Village is one of the priciest real estate markets in the country.
Get the 2026 Jackson Hole Build Cost Guide →
Frequently Asked Questions
How much does it cost to build a custom home in Teton Village?
Teton Village custom homes typically run $900-$3,000+ per square foot. A 4,500 sqft luxury build lands at $4M-$5.4M for construction, before land. Trophy ski-in/ski-out builds with direct lift access routinely run $10M-$30M+ all-in.
Can SwagerBuilds handle ski-in/ski-out builds?
Yes. We design and build around the realities of ski-in/ski-out resort living — mudroom systems, snowmelt drives, ski storage, snowload engineering, and the HVAC challenges of variable occupancy.
Are you licensed in Teton County, Wyoming?
Yes — fully licensed in Wyoming, fully insured, and bonded. We work across Teton County WY including Teton Village, Wilson, Jackson, Alta WY, Hoback, and Moran.
How long does a Teton Village custom home take to build?
Teton Village builds typically take 16-24 months from groundbreaking to move-in. Resort logistics, material lead times, HOA review, and the more architecturally complex builds at this price point all extend the schedule compared to a Teton Valley build.
What’s your minimum project size for Teton Village?
Our typical Teton Village projects start around $4M for construction. We’re highly selective about which Teton Village builds we take — these are 18-month+ commitments that require deep client/builder fit.
Building in Teton Village?
Schedule Your Consultation → Or call (208) 520-0636